| Customization: | Available |
|---|---|
| Certification: | GS |
| Pressure: | Medium Pressure |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Hydraulic Arm Cylinders for Mini Excavators
Hydraulic Cylinder bodies are of damage resistant heavy wall construction with corrosion resistance. Piston rods are precision machined, hardened and chrome plated to provide maximum wear life. Heavy duty construction. Made of quality materials for long lasting reliable service. Many mounting styles and rod ends.
Hydrualic Cylinder Hydrualic Cylinders
Material
Piston: 45# steel
Tube: 20# steel
Piston rod: chrome plated 45# steel
Cylinder cap:20# steel
Cylinder base:20# steel
Seal ring: famous Chinese brand or international brand
| Product Name | HSG Series Hydraulic Cylinder |
| Work Press | 7/14/16/21/31.5MPa37.5/63MPa Can be Customized |
| Material | Aluminum, Cast Iron,45mnb Steel, Stainless Steel |
| Bore Size | 40mm--320mm,Customizable |
| Shaft Diameter | 20mm--220mm,Customizable |
| Stroke Length | 30mm--14100mm,Customizable |
| Rod Surface Hardness | HRC48-54 |
| Operating Temperature | -40*C t0 +120C |
| Paint Color | Black, Yellow, Blue, Brown.Customizable |
| Mounting | Earring,Flange, Clevis.Foot, Trunnion,Customizable |
| Warranty | 1 Year |
| MOQ | 1 Piece |
| Delivery Time | 7-15 Days, Also depending on specific demands |
Hydraulic Cylinder production
Customization and inspection
1.I have a sample on hand, how do i know what size?
Measure the outer diameter of the cylinder, then measure the length between pin holes (with the center rod pushed all the way in to the cylinder) to get the approximate push/pull length, then measure the diameter of the push/pull rod. If you have a pin in the attachment points, measure the diameter of the pin (usually 3/4 inch or 1 inch diameter).This will give you a reading of something like a cylinder (3 inches inside) for 3 1/4 inches outside, type of attachment points, size of pins, and overall push/pull length (50 inches). The cylinder may be a 3 inch cylinder with 1 inch pins and be 50 inches overall, and maybe then you can choose different lifting, pulling, or pushing weights like 5000 pounds, etc. This is only an example of cylinder measurements; they can be bigger, smaller, shorter, have a lower weight capacity, etc.I hope this helps you out.
2.How do I know what size to order?
Four ways. 1) Send us the drawing if you have one; 2) Measure the size of the sample if you have one; 3) Send us a sample if possible; 4) Look closely at the chart; the retracted length must match what you have; the extended length may vary a little. The rod size is the shaft that moves in and out; you can see and measure that; the bore is the inside of the main housing that you can't see or measure unless it's apart. Order mainly by length, not bore and stroke, then get the rod size as close as you can, and the bore size should work out right.
3.What is the difference between double acting and single acting cylinders?
Double-acting: have a port at each end, supplied with hydraulic fluid for both the retraction and extension.Single-acting: hydraulic fluid enters through a port at one end of the cylinder, which extends the rod by means of an area difference. An external force or gravity returns the piston rod.
4.What colors are available?
Red, black, others as required.
5.Can we design our own package or print our own logo?
Yes! Package and logo will be made according to your requirements.
6.Do you have quality control system?
Yes, we have Strict Quality Control System from raw material to the final finished products to customer. The 6S and ERP management systems are rigidly implemented throughout our whole company. Our factory is an ISO9001 and CE certified manufacturer.
7.How do I choose your cylinder?
You can tell me your specifications, and we can choose the best model for you. We also have some regular models for you to choose from. You can also provide the product drawings, sizes, and photographs, and we can design the appropriate cylinder for you according to your requirements.
8.What is the material of the cylinder tube?
Honed steel,precision finished for extended seal life.
9.What are the advantages of your company?
We have our own design team and will develop new styles every quarter.And we have high quality raw material factory.
){kind=link}